IE Performance Transmission Tune for Audi B9/B9.5 2.9T RS5 & RS4

Rated 5.0 out of 5
Based on 1 review

IESOWB2

Regular price £650.68 Save £-650.68
In Stock
Approximate Ship Date: -TBD-

Free standard shipping in US for orders over $299

IE's B9 2.9T ECU Tunes are fully realized performance calibrations that deliver incredible power figures and endless smiles. However, the engine is only part of the fun as your transmission is also in charge of delivering the power to the road. Upgrading your transmission computer (TCU) with IE's Stage 2 TCU tune increases shift speed, torque limit maps, line pressure, and launch control functions, to further deliver increased performance. As a result, horsepower and torque levels are raised and acceleration is greatly improved to create complete and well-rounded drivetrain performance from your Audi RS5 or RS4.

USER ADJUSTABLE
LAUNCH CONTROL

LIGHTNING FAST
SHIFT SPEED

OPTIMIZED BY GEAR
SHIFT POINTS

LEADING FEATURES

IE engineers have completely removed all factory transmission programming shortcomings and replaced it with a truly performance orientated calibration designed for the enthusiast driver.

  • Increases transmission torque limits
  • Enables launch control in drive, sport, and manual modes
  • Includes user-adjustable launch control
  • Lightning-fast shift speed
  • Optimized gear shift RPM for the fastest acceleration
  • Enables 7000 RPM limit in all gears in manual
  • 8th gear enabled in sport mode
  • Enables downshifting into 1st gear without coming to full stop
  • Refined drive for the automotive enthusiast
  • Reduces time for double-downshifting gears
  • Line pressure increased to protect against trans slip
  • Includes Stage 2 & Stage 2 Plus TCU tune

DRIVING ENHANCEMENTS

HIGH PERFORMANCE TRANSMISSION TUNING

VARIABLE LAUNCH CONTROL

User adjustable launch control delivers chest pounding launches that will significantly lower your 0-60 ond quarter-mile times. Three different launch RPMs (street, aggressive, or race) are included to dial in the fastest launch for your vehicle and tire setup.

POWER WHEN YOU WANT IT

This complete TCU remap is packed with features that allow you to take full advantage of the increased power delivery from your ECU tune in any situaiton. Power is always on demand by unlocking 8th gear in sport mode, removing gear drop pauses, turning on 1st gear downshift without coming to a full stop, and removing take-off throttle lag. Additionally, annoyoing gear-hunting situations are elliminated with all-new drive mapping to keep the engine and transmission in the proper gear throughout the power range.

OPTIMIZED SHIFT POINTS

Stage 2 TCU remaps each gear's RPM limits for the fastest possible acceleration by shifting at the optimal points to keep the engine in peak torque/power output. This strategy pulls the car through the powerband as quickly as possible with incredible improvements in acceleration and G-forces. These optimized shift points occur when in drive mode, sport mode, and AMAX. The transmission limit remains 6500 RPM in all gears in manual mode, retaining complete manual control over the shift points when you want it.

STAGE 2 OPTIMIZED SHIFT POINTS

GEAR SHIFT RPM

1st Gear

6900 RPM

2nd Gear

6900 RPM

3rd Gear

6450 RPM

4th Gear

6550 RPM

5th Gear

6500 RPM

6th Gear

6800 RPM

STAGE 2 PLUS OPTIMIZED SHIFT POINTS

GEAR SHIFT RPM

1st Gear

6750 RPM

2nd Gear

6700 RPM

3rd Gear

6200 RPM

4th Gear

6350 RPM

5th Gear

6250 RPM

6th Gear

6250 RPM

DEVELOPMENT

IE's own tuning technology suite is used to completely reverse-engineer the factory transmission mapping, allowing our software engineers access to realign all safety protocols for the new TCU calibration. Every tune parameter undergoes months of testing on our in-house dyno systems to verify all correct conditions for peak power delivery and reliability. All driving behavioral maps undergo thousands of miles of testing and a variety of users were polled to develop the ideal driving behavior.


FITMENT & INSTALLATION

IE's POWERlink Cable and Flash Wizard software gives you the freedom to quickly flash your new IE ECU or TCU Tune. Simply plug your POWERlink into the vehicle's OBD-2 port and follow the on-screen directions, it's that easy

MAKE MODEL YEAR TRANSMISSION

AUDI

RS5

2018-2024 (B9/B9.5)

AUTOMATIC (AL552 ZF8)

AUDI

RS4

2018-2024 (B9/B9.5)

AUTOMATIC (AL552 ZF8)

If you are purchasing along with an IE ECU Tune, you do not need to purchase two POWERlink cables, one cable can flash both your ECU and TCU tunes.

Requires V4 POWERlink cable.

FIVE-STAR SUPPORT

Our number one goal from purchase to installation is to provide you with the best customer experience in the industry. We want what you want; a simple purchase process, products that exceed expectations, and a brand that's got your back. If at any point you have any questions, need help, or require support with your new tune our educated customer support team and tuning specialists are standing by and happy to help. Purchasing an IE tune not only guarantees a quality product, but that you will always have us in your corner.

Having some trouble?
Don't worry, our team of tuning specialist are here to help. Fill out the form on our Support Page to start a ticket.


average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by Michael
I recommend this product
Rated 5 out of 5
Review posted

5 Stars

Awesome company!

Loading...
Was this helpful?